1. Which
is not a language processor?
(1) compiler (2)
interpreter
(3) processor (4)
assembler
(5) None of these
(1) Software (2)
Hardware
(3) processor (4)
Driver
(5) None of these
3. Special
purpose software known as -
(1) compiler (2)
Customized software
(3) translator (4)
word
(5) None of these
4. Translator
for low level programming language were termed as
(1)
Assembler (2) Compiler
(3)
Linker (4) Loader
(5)None of these
5. An
assembler is
(1) programming language dependent.
(2) syntax dependant
(3)
machine dependant
(4)
data dependant (5)None of these
6. In latest generation
computers, the instructions are executed
(1)
Parallel only (2) Sequentially only
(3) Both
sequentially and parallel
(4) All of
above (5) None of these
7. A computer program that
translates one program instructions at a time into machine language is called
a/an
(1)
Interpreter (2)
CPU
(3)
Compiler (4)
Simulator
(5)None of
these
8. A computer program that converts an entire program into
machine language is called a/an
(1)
Interpreter (2)
Simulator
(3)
Compiler (4) Commander
(5) None
of these
9. The system unit of a
personal computer typically contains all of the following except:
(1) Microprocessor (2)
Disk controller
(3) Serial
interface (4) Modem
(5)None of
these
10. Instructions and memory
address are represented by
(1)
Character code (2) Binary codes
(3) Binary
word (4) Parity bit
(5)None of
these
11. ____is
a technique of temporarily removing inactive programs from the memory of computer system.
(1) Swapping (2)
Spooling
(3)
Semaphore (4) Scheduler
(5) None of these
12. A
grammar for a programming language is a formal description of
(1) Syntax (2)
Semantics
(3) Structure (4)
Code
(5) None of these
13. Which
of the following loader is executed when a system is first turned on or
restarted
(1) Boot loader (2)
Compile
(3) Bootstrap loader (4) Relating loader
(5)None of these
14. Poor
response time is usually caused by
(1) Process busy (2)
High I/O rates
(3) High paging rates (4) Any of the above
(5) None of these
15. An assembler is-
(1) A programming language dependent
(2) Syntax dependant (3) machine dependant
(4) Data dependant (5)
None of these
16. Minimum
zoom percentage supported by MS Word is-
(1)10% (2) 15%
(1)10% (2) 15%
(3) 25% (4)
4%
(5) None of these
17. Which
is not closed source software package?
(1) VLC (2) LINUX
(3) Open office (4) MS-Word
(5) None of these
18. You can
break the column by
(1) Pressing Ctrl + Shift + Enter
(2) Pressing Ctrl + Enter (3) Pressing Shift + Enter
(4) Pressing Alt + Enter (5) None of these
(4) Pressing Alt + Enter (5) None of these
19. The red wave underline in
MS Word document indicates-
(1) Spelling error (2) Grammar errors
(1) Spelling error (2) Grammar errors
(3) Address block (4) Word not in dictionary
(5) None of these
20. Which bar
is usually located below the title bar that provides categorized options
(1) Menu Bar (2) Tool Bar
(1) Menu Bar (2) Tool Bar
(3) Status Bar (4)
Scroll Bar
(5)None of these
21. Which
input device is not suitable to work with MS Word?
(1) Keyboard (2) Mouse
(1) Keyboard (2) Mouse
(3) Light Pen (4)
Joystick
(5) None of these
22. What
is extension of Word-pad?
(1) .txt (2) .doc
(3) .xls (4)
rtf
(5)None of these
23. background
of window screen is called as
(1) Desktop (2)
window application
(3) GUI (4)
CUI
(5) None of these
24.
The
process of software development is called-.
(1) Programming (2)
Analyzing
(3) Testing (4) Networking
(5) None of these
25. ____
is problem - oriented languages?
(1)HLL (2) database
(3) Low level language (4)
SQL
(5) None of these
26. Outlook
express known as-
(1) email-client (2)
Word processor
(3) Spreadsheet (4)database
(5) None of these
27. Language
processor known as-
(1) translator (2)
HLL
(3) Processor (4)
Low level
(4) None of these
28. fault
in a system known as -
(1) bug (2)
error
(3) Glitch (4)
interrupt
(5) None of these
29. ____
controls the way in which the computer system functions and provides a means by
which used can interact with the computers
(1) The platform (2)
operating system
(3) Application system (4) Utility
(5) None of these
30. System
software is the set of programs that enables your computer’s hardware devices
and ____ software to work together.
(1) Management (2)
processing
(3) Utility (4)
application
(5) None of these
31. Windows
and Macintosh are example of two different-
(1) Operating system (2) storage device
(3) Programs (4)
suite
(5) None of these
32. Manipulating
data to create information is known as-
(1)
Feedback (2)
programming
(3) Processing (4)
analysis
(5) None of these of these
33. The
type of software that controls the internal operation in the computer, and
control how the computer works with all its part, is which of the following-
(2) Shareware
(2) Operating system software
(3) Application software d public
domain software
(4) Public domain software
(5) None of these of these
34. In
addition to keying data directly into a database, data entry can be done from
a-
(1) input form (2)
table
(3) field (4)
data dictionary
(5) None of these
35. What
is correcting errors in a program called-
(1)
interpreting (2) translating
(3) debugging (4)compiling
(5) None of these
36. A
word processor would most likely be used to do which of the following-
(1)
keep an account of money spent
(2)maintain an inventory (3)type
a biography
(4)do a computer search in the media
centre
(5) None of these
37. A
hard copy of a file created on a computer refers to data-
(1) saved on floppy disk (2) printed on paper
(3) backed up on a tape drive
(4)sent as email (5)
None of these
38. A
____ is an organized collection of data
about a single entity
(1)
file (2)
library
(3) database (4) dictionary
(5) None of these
39. Something
which has easily- understood instruction is said to be-
(1)
user-friendly (2)
information
(3) word processing (4)
icon
(5) None of theses
40. Digital
photos and scanned images are typically stored as____ graphic with extensions
such as bmp. Png, jpg, tif or gif.
(1)
vector (2) bitmap
(3) either vector nor bitmap
(4) neither vector nor bitmap
(5) None of these.
41. After
a user has saved and deleted many files, many scattered areas of stored data
remain that are too small to be used efficiently, causing-
(1)
disorder (2) turmoil
(3) disarray (4)
fragmentation
(5) None of these.
42. Which
of the following convert all the statement in a program in a single batch and
the resulting collection of instructions is placed in a new file-
(1)
compiler (2) interpreter
(3) converter (4)
instruction
(5) None of these
43. A
program that generally has more
user-friendly interface then a DBMS is called a-
(1)
front end (2) repository
(3) back end (4)
form
(5) None of these
44. When
you install a new program on your computer, it is typically added to the ____ menu.
(1)
all programs (2) select programs
(3) start programs (4)
desktop programs
(5) None of these.
45. Which
of the following contains information about a single “entity” in the database
like a person, place, event, or thing
(1) query
(2)
form
(3) record (4)
table
(5) None of these
46. The
database administrator’s function in an organization is
(1)
to be responsible for the technical aspect of managing the information
contained in organization databases.
(2) to be responsible for the executive-level
aspect of decision regarding information management.
(3) to shown the relationship among entity
classes in a data warehouse.
(4)
to define which data mining tools must be used to extract data
(5)
None of these
47. Control
in design of an information system is used to-
(1)
inspect the system and check that it is built as per specifications.
(2)
ensure that system processes data as it was designed to and that the result are
reliable.
(3)
ensure privacy of data processed by it.
(4)
None of these.
48. Which
of the following is the first step in the transaction processing cycle, which
captures business data through various modes such as optical scanning or at an
electronic commerce website-
(1)
document and report generation
(2) database maintenance
(3) transaction processing (4) data
entry
(5) None of these
49. When
you save a presentation-
(1) All sides in a presentation are saved in
same file. (2) Two file are created one
for graphics and one for content.
(3)a file is created for each
slide.
(4) a file is created for each
animation or graphic.
(5) None of these.
50. Computers
manipulate data in many ways, and this manipulation is called-
(1)
utilizing (2) batching (3)upgrading (4)
processing
(5) None of these.
ANSWERSHEET
|
|||||||||
Qns.
|
Ans.
|
Qns.
|
Ans.
|
Qns.
|
Ans.
|
Qns.
|
Ans.
|
Qns.
|
Ans.
|
1.
|
3
|
11.
|
2
|
21.
|
4
|
31.
|
1
|
41.
|
4
|
2.
|
1
|
12.
|
3
|
22.
|
4
|
32.
|
3
|
42.
|
1
|
3.
|
2
|
13.
|
3
|
23.
|
1
|
33.
|
2
|
43.
|
4
|
4.
|
1
|
14.
|
4
|
24.
|
1
|
34.
|
1
|
44.
|
1
|
5.
|
3
|
15.
|
3
|
25.
|
1
|
35.
|
3
|
45.
|
3
|
6.
|
3
|
16.
|
1
|
26.
|
1
|
36.
|
3
|
46.
|
2
|
7.
|
1
|
17.
|
4
|
27.
|
1
|
37.
|
2
|
47.
|
2
|
8.
|
3
|
18.
|
1
|
28.
|
3
|
38.
|
1
|
48.
|
1
|
9.
|
4
|
19.
|
1
|
29.
|
2
|
39.
|
1
|
49.
|
1
|
10.
|
3
|
20.
|
1
|
30.
|
3
|
40.
|
2
|
50.
|
4
|
No comments:
Post a Comment